E3D-Online Omdömen 

The Bambulab HF 500 boosts flow by 60-70% and works great with all filaments.

I also have the A1 E3D Hotend and it increases flow drastically and works well with all filaments.

I like the product and price but I didn't like the fact that it didn't tell me until the product was entering the US that there would be a tarrif that needed to be paid by me

I bought an item for £120 and was charged £60 in customs duties. I was convinced that the parcel would come from China, not the UK.
either you ship from the manufacturer, or open intermediate warehouses, e.g. EU, USA, etc., or stores in the EU or the US

i have had very good service from your company
i have no worries about your products
the parts i have bought from you are very good
thank you.

Amazing love the product. Will always support the brand.

I have been using E3D for many years and the quality is superb. This time I was particularly impressed with the delivery time — from the UK to France in just 24 hours!

E3D is one of my favorite nozzle manufacturers. I’ve had great results with Nozzle X and ObXidian, so when I saw a new nozzle for the H2D, it was an instant purchase—no second thoughts.
The ObXidian 500 performs exceptionally well. Print quality already looks better than the stock nozzle, though I’ll need more time to fully compare the difference.

Very fast shipping. Sadly there was additional tarrifs to be paid, but that’s something to be expected where ordering from UK to EU. Tarrifs were very easy to be paid with UPS.

Fast and efficient service for an excellent product, as always!

Shipping is very fast, even overseas; goods can be received quickly.

Import fees only made known after package was ready for delivery in my country. (the fees are not small at all) This is predatory.. bringing the total price for ONE 3d printer nozzle to.... 240€.. Cant return it without paying the import fees and shipping costs. This is just unacceptable in every way. You might think it's a bit cheaper to buy from them directly... THINK AGAIN. DO NOT ORDER HERE FROM ANY COUNTRY IN THE EU!!!!!!!!!!!!

The high flow nozzle is great and really improved my print times. The complete assembly was easy to fit.
Ordered international delivery and it was sent with royal mail tracked and dispatched quickly.

Good product. Should have a note or something on purchases going to the US. Getting a random fee that needs to be paid by check or online upon delivery is kind of ridiculous(we did not receive anything online and luckily had a check). Probably not the fault of the company but just let your customers know. Feels like a hidden fee even if it’s not.

Excellent site with loads of information and guides. Was able to order the specific part that I needed (a heater core) rather than a new "kit". Fast service.

I do wish they sold a pack of mixed colour silicone socks, rather than pack of three single colours. But other than that, can't fault them. Excellent reliable products.

product as advertised and seamless to install.

Will be my go to Nozzle for the X1 going forward.

I bought a Revo and Roto upgrade for a Prusa MK3S+ with the high flow brass nozzle packfor £300. I had to cut loads out of this review as I hit the char limit, so here is a summary at the start of a long ride:

Did I ultimately get what I wanted? Yes, the new extruder and hotend works, it prints well and I like the speed increase over a V6 0.4mm setup and I like the ability to change nozzles.

Am I happy with the overall experience? No, not at all.

The print quality of the parts for mounting to a Prusa MK3 was pretty rough, a REALLY bad start given you are selling a high end 3d printing part.

The install video starts with "You have all the bits needed to fit this in the kit" I did not have ANY nuts and a small smattering of bolts so I didnt have everything by any reckoning. This meant I had to pull my old extruder setup apart first to harvest components so the video was now out of order as it does this later on. The video skips over the filament sensor option, it REALLY needs to point out that adding in the filament sensor at the end requires you to take the entire thing apart again to fit it. The video is generally of OK quality but skims over some parts and is by no means a perfect instruction video. An example being that the zipties that hold the extruder plate to the linear bearings just appear and are never mentioned. Other similar issues are present throughout. Its functional but not good.

This setup seems to completely break the thermal modelling on a modern Prusa MK3S+ (My firmware was something like 3.14.1 I think from memory). This is not mentioned at all in the instructions despite being a known issue for quite a while (I think it was raised in 2023). Ultimately despite a bit of searching around and trying things from Github and Prusa forums (notably nothing official on the E3D site) I gave up and disabled the feature. No big deal but yet another bad taste in the mouth.

I started with the 0.6mm High Flow nozzle as this was why I bought the kit, to enable extra speed. It seems to be HIGHLY sensitive to correct initial Z-height and getting this right took ages this is a concern for me as I dont see it being reliable to the nearest 0.01mm when changing nozzles. It took me a long while to be able to get a good small print that stuck down and didnt chew the filament.

I change the flow rate from 0.95 (prusa default) to 1 and this seems to have helped with a lot of my issues with print quality but ultimately on long prints of a certain type, the perimeters do not seem to join correctly. This means a lot of what I print (Gridfinity boxes at the moment) pull apart at the seam which wastes a lot of time and a lot of filament.

So yeah, thats a lot of issues. Each of which was resolved with a few evenings of fiddling and searching google and trying the multiple different solutions that people online SWEAR is the ONLY solution to my problem (or similar by others, I never got to the point of posting my own issues, none of my issues are rare). I get that there is a mentality that 3D printing is a hobby and things need tuning, this is a 3rd party add on and all that. I really do get this, I was around in some reasonably early days with my knockoff Prusa i2 kit made of threaded rod that I spent many hours tuning. But I dont want a hobby out of this anymore, I want a printer that works. I paid "printer that works" money and got a "nostalgic PTSD of the early days" experience. It seems my printer has settled now and it is just finishing a 9hr print successfully so in the long run I will probably look back and go "Yeah that E3d stuff works well" having blocked the memories of not enjoying the install but E3D did the modern thing of emailing me to beg for a review so here it is, warts and all. Mostly warts.

Excellent customer service and lightning fast shipping from the moment of ordering. A pleasure to purchase from.

Great product. Fast shipping. Really improved my MK3S.