JunoProf Red Premium Emulsion Omdömen

Professional Interior Emulsion for Lasting Results JunoProf is a calibrated premium-quality emulsion specially designed for professional interior decoration. Based on acrylic copolymers in water dispersion, it is ideal for achieving a durable matt finish on interior walls and ceilings. Recommended Areas and Surfaces This product is intended for internal application on surfaces such as: Plaster and gypsum (interior use only) Concrete, cement render, and mortar Brickwork, blockwork, and wallboards Ceilings and vertical wall spaces in domestic and public buildings It is especially well-suited for areas requiring a clean, uniform finish, such as homes, hospitals, hotels, and other public interiors. Performance and Finish JunoProf delivers consistent coverage of 10–12m² per litre per coat. The matt finish is designed to resist yellowing and provides a breathable surface resistant to condensation, fungal growth, and algal development. Its high opacity and strength mean fewer coats are needed. Certifications and Accreditations Fire Retardant on non-combustible substrates: Certified B-s1, d0 according to EN 13501-1:2007+A1:2009 A+ rating for indoor air quality (ISO 16000-9) AgBB certification (ISO 16000-6:2006) LEED and BREEAM compliant via EPD system Class 1 wet scrub resistance (UNE-EN ISO 11998:2007) Class 2 hiding power (UNE-EN ISO 6504-3:2007) Surface Preparation Guidelines All surfaces must be clean, dry, and free of dust, grease, or loose material. For new plaster, concrete, or gypsum: Ensure full curing (minimum 1 month for concrete/cement) Seal with suitable primers like Hidrocril or Primerlite For previously painted surfaces, remove flaking areas and abrade glossy surfaces before cleaning. Always test compatibility with old coatings using a test patch. Application Advice Apply using brush, roller (medium pile synthetic), or spray Do not apply below 5°C or above 80% relative humidity Ensure surface temperature is at least 3°C above the dew point Do not apply on damp or excessively heated substrates. Do not expose newly painted surfaces to moisture until fully dry, as this can cause surface defects. Limitations and Restrictions Do not apply externally – interior use only Not suitable for use on damp, frozen, or excessively porous unsealed surfaces without a primer For cleaning, use warm soapy water. Avoid using solvent-based cleaners. Dispose of materials safely, following local regulations.